Description
Ideal for bigger bathrooms and wider wall spaces, the 43inch double towel bar, made from grade 304 stainless steel is strong and durable. It will not bend in the middle under the weight of damp towels. A cleverly designed mounting system, known as RIGID Loc, will also ensure that this extra wide rail remains firmly fixed to it’s mountings.
Features:
- Width is customizable on by removing the horizontal bar and cutting on site
- Can hold 2 full width bath sheet to air dry, or 4 single folded bath sheets
- Stainless Steel construction ensures durability, sturdy horizontal bar won’t sag under the weight of damp towels
- Easy to install
Fixing System: RIGID Loc Mounting System.
This product uses our patented RIGID Loc mounting system which is designed to ensure the bathroom accessory remains secure to its mounting and will not wobble loose.
Material: GRADE 304 Stainless Steel.
Stainless Steel has a natural resistance to corrosion and therefore does not require any protective coating which makes this material ideal for the bathroom environment. The shiny polished finish of Stainless Steel is often confused with a Chrome finish, however the two could not be more different. While Stainless Steel will not peel or flake, Chrome products on the other hand are susceptible to chipping and pitting due to the nature if a coated product.
Cleaning and Care:
To keep your product in pristine condition, simply wipe it down with a warm damp cloth and then buff dry with a microfiber cloth. You could also, on occasion use a Chlorine-free stainless steel cleaner to maintain the shine. If you use stainless steel polish, make sure it is abrasive free. When cleaning wall surfaces around your bathroom accessories do not use any household detergents that may contain Chlorine based chemicals such as bleach as it will cause permanent damage to the surface of the stainless steel product.
What’s in the box:
4688 Double Towel Bar
Fischer UX 6 Plastic Plugs (4 pieces)
Wall Screws (4 pieces)
3/32″ (2.5mm) Allen Key (1 piece)
Installation Instructions (1 piece)
Mounting Template
Tools needed (not supplied):
Drill & Drill bits
1/4″ (6mm) Diamond drill bit – if drilling through ceramic tiles
1/4″ (6mm) Masonry drill bit – if drilling into Masonry (Brick)
Measuring tape
PH2 Screwdriver
Pencil
Spirit level
Installation tip:
- Check for water pipes before deciding where to drill
- In Masonry walls, always drill a smaller pilot hole first for better sizing and location accuracy